Repair of apartments and houses
November 18, 2026

Apartment Thermal Insulation in Ukraine: The Realities of Renovation

article image title

Thermal insulation is gradually becoming more than an optional comfort feature in Ukrainian apartments. It is now an important part of any comprehensive renovation project. Rising energy costs, unstable electricity supplies, the specific characteristics of centralized heating systems, and the ageing housing stock are encouraging property owners to pay closer attention to heat retention. The problem is particularly noticeable in older apartment buildings, where inadequate wall insulation, outdated windows, and poorly sealed structural elements create additional difficulties during the heating season.

However, insulating an apartment involves much more than installing a thicker layer of insulation or replacing double-glazed windows. The outcome depends on the condition of the building structures, ventilation, heating arrangements, apartment location, and the correct combination of different technologies. Poorly planned interventions can sometimes lead to condensation, mould growth, and gradual deterioration of interior finishes.

Ukrainian conditions introduce several additional considerations alongside the technical aspects: limited budgets, the need to coordinate certain works with other building co-owners, varying conditions across residential buildings, and the need to account for possible utility disruptions. Therefore, a sensible approach involves a comprehensive assessment of the apartment, selecting suitable materials, and carrying out renovation work in the correct sequence.

Why Apartment Thermal Insulation Has Become an Important Issue in Ukraine

Ukraine's housing stock consists of buildings constructed during different periods. Some apartment blocks were built according to Soviet construction standards, when energy efficiency received considerably less attention than it does today. The thermal performance of external walls, panel joints, floor structures, and windows in these buildings often falls short of modern requirements.

In prefabricated panel buildings, common problems include deteriorated seals between structural panels, freezing in corner apartments, and inadequate insulation of external walls. In brick buildings, the situation depends on wall thickness, mortar quality, the presence of cavities, and the overall condition of the facade.

Apartments on the ground and top floors form a separate category. On the ground floor, heat may escape through the floor structure above an unheated basement. On the top floor, losses can occur through the attic or roof. Corner apartments also generally have a larger external wall area, increasing the surfaces through which heat can escape.

In practice, property owners most frequently encounter the following problems:

  • Cold external walls, particularly in room corners.

  • Noticeable draughts around windows, balcony doors, and entrance doors.

  • Heat loss through deteriorated joints between structural panels.

  • Condensation on window glass and reveals.

  • Uneven heating throughout the apartment.

  • Excessive humidity and mould growth.

  • Rooms cooling down quickly after the heating is switched off.

It is important to understand that not every problem listed above indicates insufficient insulation thickness. For example, persistent condensation on windows may result from excessive indoor humidity and inadequate air exchange. Cold floors can sometimes be associated with an unheated basement, while a freezing corner may indicate a defect in a structural junction.

Where to Start with Apartment Insulation: A Technical Assessment Before Renovation

Before purchasing building materials, it is necessary to identify the main sources of heat loss. This approach helps prevent spending money on work that will not deliver the expected results.

An initial apartment inspection should cover several areas. External walls, windows, balcony structures, entrance doors, floors, and ceilings should all be checked. Particular attention should be paid to areas where moisture, fungal growth, or peeling finishes have previously appeared.

Thermal imaging provides a more objective assessment. A thermal imaging camera helps identify temperature variations across surfaces, areas of heat loss, poorly sealed joints, and potential defects in the building's thermal envelope. Such measurements are generally most informative during colder periods, when there is a sufficiently large temperature difference between indoor and outdoor environments.

The inspection should take the following factors into account:

  1. Apartment location. Corner apartments, top-floor properties, and units above unheated basements may require different technical solutions.

  2. External wall materials. Brickwork, reinforced concrete panels, and monolithic structures have different thermal properties.

  3. Window condition. The assessment should cover not only double-glazed units but also installation joints, seals, hardware, and connections to surrounding walls.

  4. Humidity levels. Excessive indoor humidity may indicate insufficient ventilation, leaks, or problems with external building structures.

  5. Heating system condition. Radiators, connections, controls, and the possibility of distributing heat evenly throughout the apartment should be checked.

For more complicated cases, it is advisable to consult a building physics specialist or energy auditor. Calculations are particularly important before installing internal insulation, as incorrectly positioning the insulation layer can create conditions for moisture accumulation within the structure.

External and Internal Insulation: Which Option Is Suitable for an Apartment?

The choice between external and internal thermal insulation depends on the building's construction, the technical condition of the facade, the owner's options, and applicable restrictions.

External Facade Insulation

External insulation is considered one of the most effective ways to improve the thermal performance of walls. Insulation materials are installed on the outside of the structure, allowing most of the load-bearing wall to remain closer to the indoor air temperature.

This approach helps reduce heat loss, limit the risk of internal surface freezing, and minimise the impact of temperature fluctuations on wall structures.

Several technological solutions are used for facade insulation:

  • Wet facade systems. Insulation boards are attached to the wall, reinforced with a special compound and fibreglass mesh, and covered with a decorative finish.

  • Ventilated facades. An air gap is provided between the insulation and external cladding. When properly designed, this gap allows moisture to escape.

  • Comprehensive facade thermal modernisation. This involves insulating the entire building or specific structural sections under a coordinated project, addressing panel joints, floor structures, and other areas that contribute to heat loss.

External works on apartment buildings involve additional organisational considerations. The facade is part of the co-owners' shared property, so independently insulating a single section may create technical and legal complications. Partial insulation can also leave untreated areas between floors, corners, and panel joints.

Where possible, comprehensive facade insulation carried out under a single project is the most effective solution. It ensures consistency in material selection, insulation thickness, and installation methods.

Internal Apartment Insulation

Internal thermal insulation is used when external work is impossible or requires complicated approval procedures. This option may be relevant for apartments in buildings with historic architecture, specially finished facades, or restricted access to external structures.

However, internal insulation requires particular attention to technical calculations. Once the insulation layer is installed, the external wall becomes colder. Under certain conditions, water vapour may condense inside the structure. This can result in damp materials, reduced insulation performance, and fungal growth.

Before starting work, it is therefore necessary to determine:

  • The thermal properties of the wall.

  • The vapour permeability of all structural layers.

  • The predicted location of potential condensation zones.

  • Whether a vapour barrier is required.

  • Whether adequate ventilation can be provided.

  • How connections to floors, ceilings, and adjoining walls will be treated.

Choosing internal insulation independently based only on material thickness and price is risky. In some cases, properly executed renovation work without additional insulation, but with thermal bridges and ventilation problems eliminated, can deliver better results.

Thermal Insulation Materials: Characteristics and Applications

The Ukrainian construction market offers a wide selection of thermal insulation materials. They differ in thermal conductivity, vapour permeability, water absorption, fire performance, mechanical strength, and cost.

The most commonly used options include mineral wool, expanded polystyrene, and extruded polystyrene. Each material has its own area of application.

Mineral Wool

Mineral wool boards are manufactured from mineral raw materials. They are widely used in facade systems, partitions, floor structures, and ventilated facade constructions.

The main advantages include:

  • Good thermal insulation properties.

  • High vapour permeability.

  • Effective sound insulation.

  • Availability of non-combustible varieties.

  • A wide selection of board densities and applications.

At the same time, mineral wool requires appropriate protection against moisture and compliance with installation requirements. For facade work, boards specifically designed for the relevant system should be used rather than general-purpose materials whose characteristics have not been verified.

Expanded Polystyrene

Expanded polystyrene, or EPS, is one of the most widely used thermal insulation materials. It is commonly applied in facade systems, particularly in external wall insulation systems using the contact method.

Its main advantages include:

  • Low weight.

  • Relatively affordable cost.

  • Ease of installation.

  • Low thermal conductivity.

  • Availability in different thicknesses and densities.

Its disadvantages include combustibility, limited vapour permeability, and sensitivity to certain chemical substances. Its use must comply with fire safety requirements and the technical specifications of the particular facade system.

Extruded Polystyrene

Extruded polystyrene, or XPS, has a dense structure and low water absorption. It is frequently used to insulate floors, plinths, and structural elements in contact with the ground.

The material offers high compressive strength but has limited vapour permeability. Therefore, using it to insulate the internal surfaces of external walls without appropriate calculations is not advisable.

How to Compare Thermal Insulation Materials Correctly

When choosing insulation, it is important to consider more than advertised thermal conductivity. Other relevant factors include insulation thickness, moisture conditions, fire safety, compatibility with installation compounds, and durability.

Criterion Mineral Wool Expanded Polystyrene EPS Extruded Polystyrene XPS
Thermal insulation High High High
Vapour permeability Relatively high Low Very low
Water absorption Depends on type and conditions Low Very low
Fire performance Non-combustible varieties available Combustible material Combustible material
Typical applications Facades, ventilated systems Facade systems Floors, plinths, foundations

The final decision should consider not just individual material properties but the performance of the entire building structure.

Windows, Balconies, and Doors: Areas Through Which Apartments Lose Heat

Even well-insulated walls cannot provide adequate comfort if window structures have installation defects or inadequate sealing. In older buildings, a significant proportion of heat loss may be associated with windows, balcony doors, and poorly sealed connections.

Replacing old windows with modern uPVC structures should involve more than choosing a multi-chamber profile. The characteristics of the double-glazed unit, profile installation depth, hardware quality, and correct installation are all important.

During renovation, the following elements should be checked:

  • The condition of seals and the tightness of window sashes.

  • The airtightness of installation joints.

  • The absence of draughts where windows meet the wall.

  • Thermal insulation around window sills and external reveals.

  • The operation of opening mechanisms.

  • The condition of balcony doors and thresholds.

If replacing the windows is not currently planned, adjusting the hardware, replacing worn seals, and restoring the airtightness of installation joints may sometimes be sufficient.

Balconies also require a comprehensive approach. Glazing alone does not turn a balcony into a fully insulated living space. For comfortable use, it is necessary to consider the insulation of the parapet, floor, ceiling, side walls, and the quality of the glazing system.

At the same time, changes to the external appearance of a facade, relocating central heating radiators, or incorporating a balcony into a room may require approval and verification of compliance with applicable construction and technical requirements.

Ventilation and Humidity: Why an Insulated Apartment May Still Feel Cold

One common renovation mistake is attempting to make a property as airtight as possible without considering air exchange. After old windows are replaced, the natural supply of fresh air may decrease. Meanwhile, moisture continues to be generated through cooking, showering, washing, and everyday human activity.

If indoor air is not properly renewed, humidity levels increase. Condensation then forms on cold surfaces, creating favourable conditions for mould growth.

The most vulnerable areas include external wall corners, spaces behind furniture, window reveals, and areas around windows.

To maintain an appropriate indoor climate, it is advisable to:

  1. Check that ventilation ducts are functioning correctly.

  2. Ensure a controlled supply of fresh air.

  3. Use an extractor hood when cooking.

  4. Avoid covering ventilation grilles with furniture or decorative finishes.

  5. Monitor relative humidity with a hygrometer.

  6. Avoid placing large pieces of furniture directly against cold external walls if this could restrict air circulation.

The ventilation system should be suitable for the apartment's floor area, the number of occupants, and the characteristics of individual rooms. In some cases, it may be worth considering trickle vents or mechanical ventilation. The choice depends on the condition of existing ventilation ducts and the building's technical capabilities.

Comprehensive Renovation with Thermal Insulation: How to Organise the Work Properly

Thermal insulation should ideally be planned as part of a comprehensive apartment renovation. This approach helps avoid removing finished surfaces a second time, allows building services to be installed correctly, and ensures that the thickness of new structural layers is considered in advance.

When preparing a project, it is important to consider not only the materials but also the sequence of work. If wall insulation is scheduled after the final interior finishes have been completed, some renovation stages will have to be repeated.

Property owners planning a comprehensive upgrade can contact RSU, which offers construction and renovation services. Involving specialists during the planning stage helps coordinate technical solutions, budgets, and the scope of future work.

A practical renovation sequence generally includes the following stages:

Stage One — Assessment and Planning. The main sources of heat loss are identified, and the condition of walls, floor structures, windows, and building services is assessed. Thermal imaging and heat engineering calculations are carried out where necessary.

Stage Two — Defect Removal. Leaks are eliminated, damaged joints are repaired, the causes of moisture accumulation are addressed, and the ventilation system is checked.

Stage Three — Thermal Insulation Work. The project-specified insulation of walls, floors, ceilings, or individual structural elements is installed. Particular attention is paid to junctions and thermal bridges.

Stage Four — Window and Building Services Upgrades. Window airtightness is checked, heating systems are adjusted, and electrical wiring and ventilation are upgraded where necessary.

Stage Five — Interior Finishing. Plastering, filling, and painting are carried out, floor coverings are installed, and decorative elements are fitted.

Special attention should be given to apartment renovation in Kyiv, particularly when older properties require comprehensive modernisation. Coordinating thermal insulation with electrical, plumbing, and interior finishing work helps prevent conflicts between individual stages and unexpected expenses.

Interior Design After Insulation: How to Preserve Space and Comfort

Thermal insulation affects not only an apartment's technical performance but also its future appearance. Internal insulation reduces usable floor space, changes the depth of window reveals, affects sill positions, and alters the geometry of certain interior elements.

For this reason, interior design solutions should be developed with future structural changes in mind. This is particularly important in smaller apartments, where every centimetre of available space matters.

When planning an interior, it is worth considering:

  • The thickness of future thermal insulation structures.

  • The positioning of radiators and other heating appliances.

  • The possibility of unrestricted warm air circulation.

  • The distance between furniture and external walls.

  • The location of ventilation grilles.

  • Finishing materials suitable for the intended operating conditions.

Lighting also requires careful planning. After insulation work and changes to window reveal configurations, the amount of natural light entering a room may change slightly. This should be considered when choosing colours, furniture, and decorative elements.

A comprehensive interior design service makes it possible to combine technical modernisation with the aesthetic finishing of an apartment within a single concept. As a result, thermal insulation does not become an obstacle to functional space planning but instead contributes to creating a comfortable living environment.

How Much Does Apartment Thermal Insulation Cost and Where Should You Avoid Cutting Corners?

The cost of insulation depends on the surface area, selected material, installation complexity, condition of the substrate, and the need for additional work. There is no universal price suitable for every apartment, as properties with identical floor areas may still have different structural characteristics.

When preparing a budget, it is important to consider more than the price of insulation boards. Total expenses may include surface preparation, priming, adhesive compounds, mechanical fixings, reinforcement, vapour barriers, installation profiles, finishing materials, and labour.

The main cost categories include:

  • Apartment assessment and preparation of technical solutions.

  • Purchase of thermal insulation materials.

  • Preparation of walls, floors, or ceilings.

  • Installation of the insulation system.

  • Sealing of joints and connections.

  • Window and ventilation upgrades.

  • Restoration of decorative finishes.

Saving money on material quality and installation can result in having to repeat the work. Using unsuitable adhesives, neglecting mechanical fixings where they are required by the system, or leaving sections of the structure unprotected can be particularly problematic.

A more sensible approach is to allocate the budget according to priorities. First, the causes of leaks, freezing, and excessive humidity should be eliminated. The main insulation work can then be carried out, followed by decorative finishing.

Expected heating savings should be assessed separately. They depend on actual heat losses before renovation, energy tariffs, how the rooms are used, heating system temperatures, and weather conditions. Promising the same reduction in expenses for every apartment would be misleading. The most reliable method is to compare energy consumption before and after modernisation under comparable operating conditions.

Thermal Insulation in Apartment Buildings: The Role of HOAs and Collective Decisions

Insulating an individual apartment does not always resolve the main problems affecting the entire building. If the facade has numerous defects, panel joints allow cold air to enter, and the roof or basement remains uninsulated, the owner of a single property cannot fully control the situation.

In such cases, homeowners' associations (HOAs) play an important role. They can initiate a comprehensive building assessment, prepare a thermal modernisation project, and organise funding for shared improvements.

Measures that may be included in a modernisation programme include:

  • Facade insulation.

  • Roof repairs and thermal insulation of the attic floor.

  • Insulation of the floor structure above the basement.

  • Restoration of joints between prefabricated panels.

  • Modernisation of the individual heating substation.

  • Hydraulic balancing of the heating system.

  • Replacement of outdated elements of shared building services.

  • Installation of heat metering and control equipment.

Ukraine has legal mechanisms supporting the energy efficiency of buildings, and homeowners' associations can access specific funding programmes for thermal modernisation projects. Participation requirements, documentation, eligible work, and the amount of available financial support depend on the individual programme and may change over time.

Comprehensive modernisation of an entire building generally offers greater potential than independently insulating individual apartments. It allows shared structures to be taken into account, reduces the number of thermal bridges, and helps provide more consistent conditions for residents.

Common Mistakes When Insulating an Apartment

Unsatisfactory results are often caused not by the properties of the insulation material itself but by incorrect installation or an inaccurate assessment of the sources of heat loss.

The most common mistakes include:

  1. Insulating without a preliminary assessment. Without identifying the sources of heat loss, money may be spent on areas of secondary importance.

  2. Internal insulation without calculations. An unsuitable solution can cause moisture condensation inside the structure.

  3. Ignoring ventilation. Airtight windows and insulated walls do not guarantee a healthy indoor climate without adequate air exchange.

  4. Using unsuitable materials. Not every insulation product is appropriate for facades, floors, or internal surfaces.

  5. Partially insulating problem areas. Untreated junctions and thermal bridges can continue to create a risk of freezing.

  6. Cutting corners during installation. Failure to follow fixing, reinforcement, and sealing requirements reduces the system's service life.

  7. Neglecting fire safety. Materials and structural solutions must comply with the requirements applicable to the specific type of work.

Another common mistake is expecting heating bills to decrease immediately after insulation is installed. Energy efficiency depends on the entire building system rather than a single insulation layer. If heating operates inconsistently, windows remain poorly sealed, and ventilation does not function correctly, the full potential of thermal insulation will not be realised.

Conclusion

Apartment thermal insulation in Ukraine requires a comprehensive approach combining technical assessment, appropriate material selection, professional installation, and carefully organised renovation work. The best results are achieved when the owner views the apartment as an integrated system in which walls, windows, floor structures, heating, and ventilation all interact.

External insulation generally offers advantages in terms of thermal performance, but it is not always accessible to individual property owners. Internal insulation can provide an alternative, although it requires thorough calculations and professional installation. Window airtightness, proper ventilation, and the elimination of moisture sources remain equally important.

Given the characteristics of Ukraine's housing stock, combining individual apartment renovation with comprehensive thermal modernisation of multi-apartment buildings is becoming increasingly relevant. This strategy makes it possible to gradually improve residential energy efficiency, reduce dependence on outdoor temperatures, and create a more comfortable living environment throughout the year.

Share the article

Have a question about repairs?

Leave a request - our manager will contact you within 5 minutes and answer all your questions

blog

Similar articles